Volumetric snowflakes made of paper strips. Do-it-yourself volumetric snowflakes made of paper Volumetric puff snowflakes made from strips

Snowflake is one of the traditional New Year's crafts. Easy to make and very effective.

How to make a 3D paper snowflake

To make such a wonderful three-dimensional paper snowflake you will need very little:

— 12 strips of paper 1.5 cm wide and 30 cm long
- glue
- scissors
- paper clips to hold the strips together while the glue dries

Work plan:

1. Take two strips and connect them with a cross (perpendicular to each other) in the center. The horizontal stripe should be above the vertical one. Glue the strips where they intersect.

2. Take two more strips and stick them above the horizontal strip at a distance of approximately 3 mm on each side of the central vertical strip. See photo below.

3. Place two more strips of paper horizontally as shown in the photo below. Glue them with glue too.

4. Glue adjacent corner sections of horizontal and vertical strips as shown in the photo. You can fasten the strips with paper clips at the gluing points until the glue dries.

5. Do the same with the remaining six strips. As a result, you should end up with two identical halves of the future three-dimensional snowflake.

6. Place the halves together as shown in the photo below, with the “petals” inward. Opposite the “petal” of one half there should be a strip from the other half.

7. Pass each strip inside the "petal". Glue the strips to the "petals" with glue.

8. Carefully cut off the protruding ends of the strips on the "petals". Here is such a voluminous paper snowflake you should get as a result.

Marina Korobova

Volumetric paper snowflake.

New Year- a time of magic and fairy tales, when each of us hopes for a small miracle. Therefore, preparations for this holiday begin as early as possible. It is especially important to pay attention holiday decorations that you can do yourself.

Probably everyone will agree that it is impossible to imagine the New Year without paper snowflakes.

Therefore I suggest master class on creating three-dimensional snowflakes from paper strips . In addition, children can be involved in such creativity, who will be happy to make jewelry.

For work we need:

- A4 paper

Ruler

Pencil

Decoration

Scissors

So, let's start by cutting strips whose width(1cm, length of the largest (21cm, medium (17cm, small) (14cm).

We take the longest strip and glue the ends. There is no need to iron the middle; it should look like a drop shape. Now we take two medium ones stripes and in the same style we glue it to the big one stripe. Then we take the small ones and do the same. And the result is a beam.

You need to make 5 such rays.

Let's start collecting snowflake. We spread the middle and stick on each other to get snowflake.

And in the middle on both sides we paste a decoration for beauty. All snowflake ready to decorate.

Publications on the topic:

I bring to your attention a master class on making flower ball from colored paper napkins. For its manufacture we need:

Graduation evening in kindergarten- the most beautiful and responsible event in preparatory group. Where does readiness begin?

On one of the hot days summer days The girls of our group and I decided to decorate our group with a bouquet of summer flowers. While preparing the material for.

Flowers are large and beautiful. They can be used for decoration music hall, group rooms and staircases. In process.

Applique is one of the most favorite types of visual arts for children. I would like to introduce you to a master class in volumetric appliqué.

To show children's interest in appliqué, I make voluminous appliqués with them from paper strips. First I tell them a fairy tale. “Once upon a time.

Making three-dimensional appliqué is not only exciting, but also useful. It promotes development fine motor skills, creative abilities,.

The easiest way to make a snowflake is to fold a piece of paper into a triangle and cut out the design. Then you unroll the sheet, and an openwork protrusion comes out. A voluminous snowflake made from strips of paper is even more interesting and dexterous; we will now tell you how to make one. You can make many, many snowflakes, connect them together and decorate the room with the resulting garland.

What you need to make snowflakes:

- paper strips for quilling (blue and dark blue);
- scissors;
- PVA glue.

Paper strips must be cut into pieces of different sizes: the longest blue one is 10 cm; two blue – 7 cm each; two short blue ones - 5 cm each. According to these dimensions, the snowflake will be 11 cm in diameter.

Take a long strip and glue the edges together. There should be a loop.

And on the right is the second same stripe.

Now it's time for short blue stripes. Glue one on the right and left.

It turns out like this petal from strips of paper for a voluminous snowflake.

Make several of these crafts.

They will look great among other decorations.

There are only a couple of weeks left until the New Year, which means it’s time to think about how you will decorate your home. If you think that a Christmas tree and festive garlands will be enough, then you are deeply mistaken. A forest beauty can decorate a living room, but in all other rooms festive mood feel will not be.

If you want to recreate the New Year's atmosphere in every corner of your home, then don't be lazy and decorate everything around with New Year's attributes. Volumetric paper snowflakes are best suited for this. And although this decor seems very simple at first glance, it can turn your home into a fabulous snowy kingdom.

Therefore, find some free time in your busy work schedule, stock up on white paper and scissors and start creating New Year's tale for yourself and your family.

How to make a three-dimensional 3D snowflake for the New Year from paper?

Volumetric snowflake 3D

If you want to truly surprise your household, then decorate your house with voluminous 3D snowflakes. Depending on the size, such a craft can be placed on a Christmas tree, window, wall or even on furniture. A garland made from such hand-made decor will look very beautiful.

Try to make snowflakes of different sizes and fasten them on a thread so that they are all at different levels. If you are not lazy and make several of these garlands, you can make an imitation of snowfall in some room.

Materials for making three-dimensional 3D snowflakes:

White paper (you can use any other color if you wish)
Stationery stapler
Paper scissors
Ruler and pencil
Any glue

Figure No. 1

First of all, start making a stencil, with which you can later make individual blanks for the future decoration. To do this, take a thick sheet of paper (you can even use cardboard) and draw six straight lines on it at right angles. Make sure that they are placed on the sheet parallel to each other and do not intersect anywhere. Draw them at a distance of 1 centimeter from each other.

Figure No. 2

After this, take six sheets of the same size (square), fold each of them separately diagonally and, using a pre-made stencil, cut three slits on them. If you did everything correctly, then you should have six isosceles triangles with parallel cuts on your table.

Figure No. 3

Take one of the blanks and carefully unfold it. On the table in front of you there should be a square consisting of several smaller squares. The corners of the smallest square (it is located in the very center of the workpiece) must be carefully tucked towards the center and fastened with glue.

Figure No. 4

After this, the sheet must be turned over to the next side and the free corners of the next square secured in the same way. You need to continue these actions until you get something like a multi-layered icicle. Thus, you need to glue all the remaining five parts.

Figure No. 5

Next, we take the finished icicles and carefully fasten them together using a stapler. We do this in two stages. First, we fasten three icicles into one. Then, using the same stapler, we fix the two formed halves together. Do everything as carefully as possible, but do not spare the brackets; if you do not fasten them well, the finished product will simply fall apart.

Do-it-yourself volumetric paper snowflakes: step-by-step instructions

Step-by-step instruction

Volumetric snowflakes They always look very beautiful, but unfortunately, they take a lot of time to make. In view of this, if you want to decorate your home for the New Year with just such a festive atmosphere, then try to make a simpler version of volumetric decoration. It will have a slightly different format, but most importantly, you will spend a minimum of your time on its production.

Materials:

Sheets of paper
Thread and needle
Compass
Pencil and ruler
Red or yellow fabric

Manufacturing rules:

Take a sheet of paper and draw four circles of equal diameter on it. To make small snowflakes, a diameter of 5 centimeters will be enough, and to create larger products this figure can even increase to 10 centimeters.

Carefully cut out the drawn circles with scissors, and then using a ruler and pencil, divide each circle individually into eight equal parts. Along these lines, the workpiece will need to be cut with scissors from the edge to the center.

Then the ends of the resulting petals must be carefully bent towards the center and fixed together with glue. If you can't attach a petal correct form, try helping yourself with a simple pencil.

So make three more of these paper flower, and then start fixing all the workpieces together. This can be done with glue or take a thread and a needle and simply sew all parts of the snowflake.

In order for such a snowflake to look complete, be sure to cut out a small circle from the fabric and attach it in the very center of the product. If you wish, you can decorate it a little with sparkles and small sequins.

Types of volumetric snowflakes - origami: photo

Volumetric snowflake

Two-color origami

Many of us associate origami with something very complex and incomprehensible. But in reality, this technique simply requires a little more concentration than any other man-made process. Therefore, if you show just a little patience, you will probably be able to make voluminous snowflakes this way. But even in this case, there are several methods for creating New Year's decorations.

Snowflake origami

The first type includes ordinary origami, which involves folding paper sheets in a certain order, which subsequently produces a three-dimensional product with a 3D effect. In this case, you do not have to glue or fix anything. All that will be required of you to create a decoration is simply to fold the sheet correctly.

Snowflake karigami

The second and more complex type of this technique is the so-called karigami. In this case, the process involves both the correct folding of the sheet and the most accurate cutting of the pattern. If you are making such an origami snowflake for the first time, then it will be better if you first draw the future pattern and only then start cutting it out.

This can be done with either standard scissors or manicure scissors. The latter option is preferable for beginners as it will provide the opportunity to correctly cut through the most intricate pattern. After cutting, all you have to do is bend some parts and the voluminous karigami snowflake will be ready.

Modular snowflake

Elements of a modular snowflake

The last method of creating snowflakes is the most difficult, but ready-made decorations they turn out truly fabulous. This type is also called modular origami. In this case, you will first have to make quite a lot of different small parts, and then connect them in the correct order. The disadvantage of this origami method is that if during the joining process you make the most minimal mistake, it will greatly spoil the visual perception of the decoration.

Volumetric snowflakes made from strips of paper: diagrams

Volumetric snowflake in the shape of a star

If you want to get the most voluminous snowflake, then make it from paper strips. In this case, you will be able to independently regulate how much this or that part of the product will protrude, but most importantly, you will not have to watch how you bend or draw lines all the time.

To create this decoration you will need scissors, glue and thin strips of paper of any color. If you want to make the most airy snowflake, then use strips 3 to 5 millimeters wide to make it. If you plan to decorate your house with large voluminous snowflakes, then cut strips with a width of 8 millimeters.

Scheme No. 1

Volumetric snowflakes made of stripes:

So, first of all, take a sheet of paper and cut five strips of the same width from it. The length of these blanks will be different. In order to make one part of a snowflake you will need 1 strip 25 cm long, 2 21 cm long and two 19 cm long.

At the next stage, coat the ends of the blanks with glue and carefully fasten them together. Let the petals dry a little, and then begin to form a voluminous leaf out of them. Be sure to check whether all the parts are well secured to each other and, if necessary, then additionally secure them with thread or an ordinary clothespin.

In this way we make at least eight more pieces of paper. If you want the finished product to be more voluminous, then make 10 or 12 leaves. Let the blanks dry thoroughly and begin assembling the product.

Cut a strip of thick paper 1 cm wide and glue it into a circle. All previously made blanks must be carefully attached to this circle. If you see that the structure is not very strong, then try first gluing the leaves themselves together and only then fixing them on the core.

The next method of creating a three-dimensional snowflake is considered quite complicated, but still, if you decide to make a decoration using this method, you will be satisfied with the result (diagram No. 2). To create a medium-sized decoration you will need 6 strips 25 cm long, glue and paper clips.

Scheme No. 2

So:

At the first stage, we begin to weave the strips together so that a square is formed in the center. We fix each strip with glue or a paper clip.

At the second stage, we begin to connect strips that are close to each other. To do this, first lubricate their ends with glue and then carefully fasten them together. After these steps you should end up with something resembling a leaf.

We form the three remaining parts of the workpiece in this way and move on to creating another such part of the snowflake. After it is ready, all you have to do is put them together so that your product visually resembles a flower. After the glue has dried, the paper clips can be removed and the snowflake can be hung on a Christmas tree or attached to a window.

Beautiful three-dimensional snowflakes - balls: diagrams, photos

Photo #1

Photo #2

Below we will tell you how to make a New Year's snowflake ball from colored paper. If you want it to look more like the snowflake we are used to, then before you start gluing all the parts of the product together, cut an interesting pattern on them. This will help make the decoration lighter, airier and more festive.

Figure No. 1

Take paper of any color and draw 12 circles on it. In order for your Christmas decoration It turned out perfect; they should all have the same diameter.

Figure No. 2

Fold all the pieces in half and place them in one neat pile. If you use multi-colored paper to create a snowflake ball, do not forget that the colors must be alternated.

Place this workpiece under anything heavy for a while and leave it there for 10-15 minutes. During this time, the bend line of the circles will become very noticeable, and you will be able to correctly fix them together.

Figure No. 3

To do this, carefully straighten the workpiece, and then use a stapler to connect all twelve parts together. Make sure that the staples are located exactly on the fold line.

Figure No. 4

Once you're done with this process, you can move on to creating the form. Straighten the circles and start gluing them together with glue. They must be connected in such a way that each separate half of the circle is attached to the adjacent part of the product on one side and at the bottom on the opposite side.

Large volumetric paper snowflakes: templates

Template #1

Template #2

Today we have already introduced you to the most common ways to create voluminous New Year's snowflakes. And as you probably already understood, if desired, even a child can make this beautiful New Year’s decoration out of ordinary paper.

But finally, we decided to introduce you to another method of creating holiday decor. Below we will tell you how to easily and quickly make a large voluminous snowflake.

Scheme for manufacturing

Snowflake accordion:

To begin, take paper and cut strips of the same width from it. Their width can vary from 7 to 15 centimeters.

Fold the blanks in half, and then draw the outline of the future ornament on them. Take scissors (you can use nail scissors) and carefully cut through the design.

If you chose not very thick paper to make a snowflake, then you can fold two parts at once and cut them together.

Then fold each part separately like an accordion. Make sure that all workpiece segments are the same size. If at least one of them is larger or smaller than necessary, then you simply will not be able to glue the two parts together.

When the accordions are ready, coat their edges with glue, fasten them and wait until they dry completely. After this, take the snowflake and straighten it with smooth movements.

If you want your New Year's decoration to be more colorful, then use paper to make it. different colors. For example, combine White color with blue, pink, peach or mint. Also, if you wish, you can glue several small beads or bright pieces of glass onto the snowflake.

Video: Do-it-yourself volumetric snowflake

Volumetric snowflakes made of paper strips will decorate any room. New Year's holidays. The craft is quick and easy, so I recommend involving children in the creative process - they will have fun :)

The master class is presented in step by step photos and video format.

To work you will need:

5 strips of paper 21 x 1 cm;
10 strips of paper 17 x 1 cm;
10 strips of paper 14.5 x 1 cm;
glue stick;
sequins to decorate the center.

How to make voluminous snowflakes from paper strips:

Cut strips to the required length. This craft looks good on plain paper, but I wanted a riot of colors :)
Fold the long strip in half without smoothing the fold!!! (We want a voluminous snowflake 🙂) And glue the ends together. Take a strip middle length, glue one end at a slight angle on top of the ends of the first strip, and the second on the bottom. We glue the second strip on the other side of the big one. Similarly, glue two small strips, alternating sides.
We prepare 5 such rays.
We glue them together. To ensure that the rays are evenly spaced, it is convenient to use a template. You can print a picture from the Internet or, using your knowledge of mathematics, draw 5 rays with equal angles from each other.
The layer of paper is quite large, so when gluing the rays I applied more liberally.
The middle turned out to be not very neat, so the sequins came in very handy.